Le diptérocarpol—II Stéréochimie en C-13 et en C-17

Various reactions of ring D of dipterocarpol (hydroxy-dammarenone-II) show this triterpene to have the configuration 13β, 17H, in accordance with biogenetic speculations.     

Structural and energetic aspects of the protonation of phenol,catechol, resorcinol,and hydroquinone

The various protonated forms of phenol (1), catechol (2), resorcinol (3), and hydroquinone (4) were explored by ab initio quantum chemical calculations at the MP2/6-31G(d) and B3LYP/6-31G(d) levels. Proton affinities (PA) of 1-4 were calculated by the combined G2(MP2,SVP) method, and their gas-phase basicities were estimated after calculation of the change in entropy on protonation. These theoretical data were compared with the corresponding experimental values determined in a high-pressure mass spectrometer. This comparison confirmed that phenols are essentially carbon bases and that protonation generally occurs in a position para to the hydroxyl group. Resorcinol is the most effective base (PA = 856 kJ mol-1) due to the participation of both oxygen atoms in the stabilization of the protonated form. Since protonation is accompanied by a freezing of the two internal rotations, a significant decrease in entropy is observed. The basicity of catechol (PA = 823 kJ mol-1) is due to the existence of an intramolecular hydrogen bond, which is strengthened upon protonation. The lower basicity of hydroquinone (PA = 808 kJ mol-1) is a consequence of the fact that protonation necessarily occurs in a position ortho to the hydroxyl group. When the previously published data are reconsidered and a corrected protonation entropy is used, a proton affinity value of 820 kJ mol-1 is obtained for phenol.     

A pipecolic acid (Pip)‐containing dipeptide,Boc‐d‐Ala‐l‐Pip‐NHiPr

The title dipeptide, 1‐(tert‐butoxy­carbonyl‐d ‐alanyl)‐N‐iso­propyl‐l ‐pipecol­amide or Boc‐d ‐Ala‐l ‐Pip‐NHⁱPr (H‐Pip‐OH is pipecolic acid or piperidine‐2‐carboxylic acid), C₁₇H₃₁N₃­O₄, with a d –l heterochiral sequence, adopts a type II′β‐­turn conformation, with all‐trans amide functions, where the C‐terminal amide NH group interacts with the Boc carbonyl O atom to form a classical i+3 i intramolecular hydrogen bond. The C^α substituent takes an axial position [H^α (Pip) equatorial] and the trans pipecolamide function is nearly planar.     

Structural changes in the monomeric despentapeptide (B30-B26) insulin crystal

Insulin modified by the removal of its 5 B chain C terminal residues is monomeric but remains substantially potent. The crystal structures of the beef and insulin (dpi) with two molecules in the asymmetric unit has been determined by x-ray analysis. The 3-dimensional structure ofdpi proves to be generally similar to that of native molecule in 2Zn insulin. More detailed comparison reveals that the slight differences in the two independent molecules of beefdpi are distributed uniformly throughout the structure in contrast to insulin in 2Zn insulin, where the structural changes are concentrated in specific regions. The loss of symmetry in thedpi crystal appears to be the inability of the A9 serine to pack effectively in the C2 cell. The efficient packing of the sheepdpi molecule whose crystal structure has also been determined and where A9 is glycine supports this conclusion.     

End-labeled free-solution electrophoresis of DNA

DNA is a free-draining polymer. This subtle but "unfortunate" property of highly charged polyelectrolytes makes it impossible to separate nucleic acids by free-flow electrophoresis. This is why one must typically use a sieving matrix, such as a gel or an entangled polymer solution, in order to obtain some electrophoretic size separation. An alternative approach consists of breaking the charge to friction balance of free-draining DNA molecules. This can be achieved by labeling the DNA with a large, uncharged molecule (essentially a hydrodynamic parachute, which we also call a drag-tag) prior to electrophoresis; the resulting methodology is called end-labeled free-solution electrophoresis (ELFSE). In this article, we review the development of ELFSE over the last decade. In particular, we examine the theoretical concepts used to predict the ultimate performance of ELFSE for single-stranded (ssDNA) sequencing, the experimental results showing that ELFSE can indeed overcome the free-draining issue raised above, and the technological advances that are needed to speed the development of competitive ELFSE-based sequencing and separation technologies. Finally, we also review the reverse process, called free-solution conjugate electrophoresis (FSCE), wherein uncharged polymers of different sizes can be analyzed using a short DNA molecule as an electrophoretic engine.     

Quantitative analysis of mutagenic heterocyclic aromatic amines in cooked meat using liquid chromatography-atmospheric pressure chemical ionisation tandem mass spectrometry

Five mutagenic heterocyclic aromatic amines (HAAs) were quantified from meat extracts, and grilled and pan fried bacon samples using stable isotopically labeled internal standards. These compounds were isolated from the matrices by a tandem solid-phase extraction procedure, followed by separation on reversed-phase liquid chromatography (HPLC) and quantified by atmospheric pressure chemical ionization tandem mass spectrometry (APCIMS-MS). Tandem mass spectrometry (MS-MS) acquisition was done in selected reaction monitoring (SRM) mode to provide a high degree of sensitivity and selectivity for accurate quantification of HAAs. The detection and quantification limits of these HAAs approached 0.015 and 0.045 microg/kg (part-per-billion), respectively, with only 4 g of meat. The HAA levels ranged widely from 0.045 to 45.500 microg/kg, and 2-amino-3,8-dimethylimidazo[4,5-f]quinoxaline (MeIQx) was the predominant HAA found in these samples. The amount of HAAs formed was highly dependent upon the type of meat and method of preparation. An intralaboratory comparison of the extraction procedure showed that estimates of these HAAs obtained by three different individuals at HAA levels below 2 microg/kg were within 5% with coefficients of variation below 19%, indicating the robustness of the analytical method. Moreover, because all of these HAAs from this class of molecules undergo facile cleavage at the N-methylimidazole moiety under collision-induced dissociation (CID) conditions, MS-MS analysis in the constant neutral loss mode of [M+H]+-15 enabled the identification of two other HAAs, 2-amino-3-methylimidazo[4,5-f]quinoxaline (IQx) and 2-amino-1,7,9-trimethylimidazo[4,5-g]quinoxaline (7,9-DiMeIgQx), which have rarely been reported in cooked meats.     

X-ray Crystal Structure, ab Initio Calculations, and Reactivity of 1,3,2lambda(5)-Diazaphosphetes: A New Type of 4-pi-Electron 4-Membered Heterocycle

The structure of P,P-bis(diisopropylamino)-4-phenyl-1,3,2lambda(5)-diazaphosphete, 1a, has been determined by a single-crystal X-ray diffraction study (C(19)H(33)N(4)P, monoclinic system, space group P2(1), a = 9.482(1) ?, b = 11.374(3) ?, c = 9.668(2) ?, beta = 97.16(1) degrees, Z = 2). According to quantum chemical calculations at an RHF level of optimization utilizing the 6-31g(d,p) basis set, 1a has a zwitterionic structure with the negative charge delocalized on the NCN allylic fragment and the positive charge localized at the phosphorus. Heterocycle 1a reacts with water and benzaldehyde affording N-phosphoranylbenzamidine 3 (95% yield) and the expected aza-Wittig adduct 4 (85% yield), respectively. Addition of 1 equiv of methyl trifluoromethanesulfonate and of 2 equiv of BH(3).THF to 1a affords cyclic phosphonium salt 5 (94% yield) and the bis(borane) adduct 6a (90% yield), respectively. Dimethyl acetylenedicarboxylate slowly reacts with 1a giving rise to 1,3,4lambda(5)-diazaphosphinine, 9, in 70% yield. The X-ray crystal structures of products 2,3, and 6a are reported (2: C(26)H(38)N(5)P, monoclinic system, space group C2/c, a = 16.337(8) ?, b = 19.810(2) ?, c = 8.800(2) ?, beta = 117.68(2) degrees, Z = 4. 3: C(19)H(35)N(4)OP, orthorhombic system, space group P2(1)2(1)2(1), a = 9.090(1) ?, b = 12.955(2) ?, c = 17.860(3) ?, Z = 4. 6a: C(19)H(39)B(2)N(4)P, orthorhombic system, space group P2(1)2(1)2(1), a = 10.340(1) ?, b = 13.247(1) ?, c = 16.996(1) ?, Z = 4).     

Self-assembled monolayer gold electrode for surfactant analysis

A gold electrode coated with a self-assembled monolayer of octane-thiol (SAM/Au) has been used as an amperometric detector for the determination of surfactants. This detector operated in the presence of a high percentage of organic solvent and was adapted to an HPLC System. At the SAM/Au, the electrochemical response of an electroactive tracer (potassium ferricyanide) was completely inhibited, but, in the presence of a cationic surfactant, the electrochemical reduction was progressively restored. In flow injection analysis, using the SAM/Au in an amperometric flow-through detector polarised at 0.0 V vs Ag/AgCl, a linear response (i=f{[surfactant]}) was observed for cationic surfactants e.g. cetylpyridinium chloride in the concentration range 2 × 10⁻⁶–1 × 10⁻³ M. The electrochemical data along with the determination of the ion pair stoichiometry between the redox tracer and the surfactant suggest an electrochemical response related to ion pair formation and governed by electron transfer by tunneling effect. Received: 28 January 1997 / Accepted: 7 March 1997     

Chemical ionization desorption mass spectrometry of some quaternary ammonium salts

The ammonia chemical ionization desorption spectra of N,N-dimethyl quaternary ammonium iodides in addition to high protonated molecular ion [M + H]⁺ intensity, show signals for an ion radical composed of N-methyl abstracted salt cation and ammonia [C + NH₃? CH₃]^+˙. These ions corresponding to the cation +2 show increased importance in the chemical ionization mode, using the same reagent gas. The technique of chemical ionization desorption appears suitable for the analysis of salts, and thus for the determination of the molecular weight of both anion and cation.     

Direct coupling of polymer-based microchip electrophoresis to online MALDI-MS using a rotating ball inlet

We report on the coupling of a polymer-based microfluidic chip to a MALDI-TOF MS using a rotating ball interface. The microfluidic chips were fabricated by micromilling a mold insert into a brass plate, which was then used for replicating polymer microparts via hot embossing. Assembly of the chip was accomplished by thermally annealing a cover slip to the embossed substrate to enclose the channels. The linear separation channel was 50 microm wide, 100 microm deep, and possessed an 8 cm effective length separation channel with a double-T injector (V(inj) = 10 nL). The exit of the separation channel was machined to allow direct contact deposition of effluent onto a specially constructed rotating ball inlet to the mass spectrometer. Matrix addition was accomplished in-line on the surface of the ball. The coupling utilized the ball as the cathode transfer electrode to transport sample into the vacuum for desorption with a 355 nm Nd:YAG laser and analyzed on a TOF mass spectrometer. The ball was cleaned online after every rotation. The ability to couple poly(methylmethacrylate) microchip electrophoresis devices for the separation of peptides and peptide fragments produced from a protein digest with subsequent online MALDI MS detection was demonstrated.